Mät enligt enligt måttmallen nedan.
På Cavallo tar du måtten stående och höjdmåttet tas från mitten av knäskålen till utsidan häl, kontrollmåttet tas från knäveck till golv.
Omkretsen för C-måttet tas på vidaste punkten på dina vader, övrigt enligt anvisning.

Är du osäker, kontakta oss gärna via mejl med bilder när du mäter, till info@hogstaridsport.com eller telefon 08-7590507, vi hjälper dig gärna!

Ordering riding boots is not always an easy process and therefore you are always welcome to contact us in the store for advice and guidance regarding models, options and measurements. 

If you would like to come to the store for ordering measurments and testing, it is always best to book an appointment. Otherwise there is a risk that the person who can do the test is not on site and then we might not be able to help you with the advice you need. Riding boots are fun but there are many details to keep in mind and not everyone in the staff has had the chance to learn everything.

Buying your boots online works great to. If you would like to order your boots online it can feel safe to know that we always contact you to double check that everything is correct, before ordering your boots from the supplier and manufacturer.

Under Size Guide, you will find the size chart and measurement template for each boot so that you easily can see what size you shold have on your riding boots. 

The riding boot size guide only states which foot size, height measurements and width at the widest point of the calf cold fit, but there are a few other measurements that are of real interest. The measurement just below your knees is also important to find out because a standard boot is between 1.5-2 narrower there than at the widest point of the calf. If you have verry narrow legs or a leg that is not very curvy the measurement under the knee can be about the same as at the widest point of the calf, and if so it will be a problem to close the boot. If you have a curvy calf, it can instead be a little big above the widest point of the calf because the boot can not be made to narrow up bellow the knee, as the risk is instead that the arch of the riding boot cuts into the thigh.

If you order a riding boot that is very narrow in the ankle, the lower measurements are also important to keep track of. Jumping boots, for example, have an opening at the back, because it would not be possible to get the foot in if you had the zipper in the front or on the side, the hole for the foot is simply not large enough.

If you have a high arch, it is also a bit limiting in which model of riding boots that suits you. All this and a little more is involved in the choice of riding boots and model.

When it comes to height, the different boot manufacturers have different ways os measuring and specifying their hight. 
- Cavallo measures and indicates the measurement from the middle of the kneecap down to the floor on the outside of the heel (usually about 2 cm higher than the knee crease measurement. The arch of cavallo's dressage boots is 8 cm from the height of the knee crease.
- DeNiro indicates the measurement from the knee crease to the floor. DeNiro's arch is 8 cm on dressage boots 6 cm on jumping boots.
- Königs indicates the height based on the height of the arch. Some boots have a 7 cm frame as standard, but Dressage DeLuxe and Dressage Pro have an 8 cm frame. Most models have a 2 cm lower inside than the measurement in the knee crease, except for Palermo and Dressage Pro which have the same. König's measurement tables states the shaft height of the arch and the inside as well as the width on the lower shaft inside, and otherwise it is a measurement table with the height and width of the arch.

If you need our help or want to book an appointment for testing, please contact us at info@hogstaridsport.com or call 08-759 05-07.

Care advice for riding boots/riding shoes!

In order for you to enjoy your boots or shoes for many years to come, here are some care tips that are good to follow:

• Always use shoe polish, in a suitable color for your riding boots and shoes. If the color of your boots is not available as a shoe polish, use an uncolored neutral.
• For everyday cleaning, wipe the boots/shoes with a damp cloth. Dirt such as soil and mud can be removed with lukewarm water, do not use hard brushes or similar. Wipe dry with a soft cloth. Avoid using glycerin soap or leather conditioner when cleaning and polishing, they soften the leather more than you want with riding boots.
• Heavily soiled boots can be cleaned once in a while with a mild saddle soap on the inside of the shaft, where the horse's dust, hair and sweat otherwise contribute to faster destruction. Wipe off the saddle soap residue with a damp cloth when you're done.
• At the transition between sole and boot, you can advantageously use a soft toothbrush or boot brush to gently remove mud and gravel.
• Use shoe cream after cleaning when the boots have dried properly. Shoe cream both regreases and impregnates in a good way. Don't forget the transition between sole and shoe. If you have dark boots and a light horse, feel free to use uncolored shoe polish on the inside of the boot, so you avoid it getting colored from the shoe polish when it sweats.

Polish your riding boots so they shine

1)      Clean the riding boots properly before polishing them.

2)      Spread a thin layer of shoe polish evenly over the boot or shoe with an applier or cloth.

3)      To get a nice result, then brush in the shoe polish carefully with a soft brush or cloth with quick movements.

4)      The riding boot will be shiniest if you finish the polish with a nylon sock that you rub at high speed so that the friction creates heat.

5)      Shoe shine sponges can absolutely be used on leather riding boots for added shine. Never use fur polish or hairspray on the leather (was popular a few years ago to bring up the shine) it wears and destroys the leather in the long run.

Common advice

• Riding boots are used in a very aggressive environment where mud, moisture, horse sweat, dust and stable manure are part of everyday life. All these components wear hard on the leather, which is a natural product.
• When using the riding boots, they are guaranteed to get damp from the inside as well and therefore need to dry properly before storage. It is best done at room temperature. Do not use a shoe/boot dryer with hot air. Do not close the boots in a boot bag or similar before they are dry.
• Insert shoe blocks or boot stretchers to ensure the boots retain their original shape. Important that the boots are dry inside if the stretcher is tight, otherwise the fine calfskin on the inside will be ruined. Cedar wood boot stretchers are a bit more expensive but have the ability to absorb moisture and make the inside of the boot shaft a better environment.
• When cleaning suede boots/shoes, they too must first be completely dry. Brush off dirt and dust regularly with a soft brush. On stains, you can use a special suede brush. Move the brush in gentle, circular motions over the stain. Do not rub back and forth as this can cause unsightly tears in the suede. Use a suede sponge if you want to clean in depth. Impregnate the suede with a good quality spray and do not spray too close to the boot.
• Riding boots in Brushed leather are cleaned with a damp cloth and DeNiros Polish can be used here, the inside is in calfskin so they are cared for like normal riding boots.
• Lacquered riding boots are wiped off with a damp cloth and here too, the inside is made of calfskin, which is also cared for like normal riding boots.
• Store your riding boots/shoes in a dry environment as moisture damages.
• It is important that you pull the zipper, completely straight, all the way down when putting it on and taking it off. If the boots are a bit tight, just pull the zipper where it goes without any problems, walk for a while, then pull them all the way when the leg has narrowed a bit due to the increased blood circulation.
• Clean the zipper regularly from gravel and mud with a soft brush. Feel free to use zipper spray for lubrication.
• For boots with grips, do not use any care products directly on the grip as the grip will disappear. Use only a damp cloth and wipe clean.

Most of our shoe and boot brands have their own care products, which can usually be used on other brands' products, but in the first place choose the product recommended by the supplier.

Remember do not use the boots when you are in the stables, fetching the horse from the paddock or doing other things, as it wears down a fine and exclusive product unnecessarily. Wear them for riding, and you will extend the life of them even more.

Good luck with your new boots, if you take good care of them you will be able to use them much longer than otherwise.